Fingertips guide the front of the rotary handpiece toward a slot in a machined steel block

DESIGNED IN GERMANY

TOLNU Precision
Finishing Tool

For finishing narrow slots, inside corners, and edges on machined parts, models, sculpture, and 3D prints.

  • SX
  • S1
  • S2
  • F1
  • F2
  • F3
Product concept
Explore applications

Six Design Priorities

These priorities guide how the working end removes material, follows contours, and finishes edges.

  • Fracture Resistance

    Working-end durability under repeated contact with the workpiece.

  • Grinding Efficiency

    Targeted material removal at small burrs and print support marks.

  • Smooth Performance

    Steady contact when moving from a straight edge onto a curve.

  • Flexibility

    Controlled flex as the working end follows curves and inside corners.

  • Precision Engineering

    Different working diameters for narrow slots, inside corners, and edges.

  • Consistent Quality

    Repeatable edge profiles and surface finishes on comparable parts.

The Tool’s Variable-Taper Working End

The taper changes along the tool. The fine tip reaches narrow slots and inside corners. The wider section addresses edges and transitions between surfaces.

Side view of the blue fluted working end, from its fine left tip to the wider section before the purple collar
Fine tip
For the junction between a slot floor and its sidewall, or a tight inside corner.
Wider section
For outer edges, raised joints, and the transition between two contours.

Finishing Scenarios

Each marker points to the area to finish.

Industrial finishing

Change industry
Marked burr on the lip of a machined metal slot

Deburring a slot opening

Remove a raised burr from the lip of the slot and smooth the opening.

Marked inside corner of a dark machined metal bracket

Finishing an inside corner

Check the junction of the slot floor and sidewall for raised material.

3D print finishing

Change industry
Marked raised support contact point inside a printed enclosure

Removing a support mark

After a support comes away, a raised mark can remain in the enclosure corner.

Marked mating rim on a dark blue printed enclosure beside its lid

Refining a mating edge

Check the rim where the enclosure meets its lid for raised spots that affect the fit.

Model making

Change industry
Marked sprue nub on the top edge of a miniature car body

Removing a sprue mark

Trim the nub left where the model part was attached to the sprue.

Marked upper window-frame edge on a cream model carriage

Finishing a window frame

Check the inner window-frame edge for stray material while preserving its corners.

Art and sculpture

Change industry
Marked curved groove on a relief sample

Finishing a relief groove

Locate the area to refine within a groove while preserving the adjacent raised shape.

Marked edge of a raised leaf contour on a terracotta relief disc

Refining a raised contour

Refine the edge where a raised contour meets the groove to clarify the transition.